Oracle 1Z0-052問題集の正解率がどう？ [Oracle]
KtestのOracle 11g 資格1Z0-052問題集はIT専門家からすべての問題と解答を確認して、正解率が98％になります。
人性化のサービス、よくお客様の立場から考えて、もっといいサービスを提供することはktestの信念です。 お客様がOracle 11g資格 1Z0-052問題集を購入する前に無料でOracle 1Z0-052問題集のサンプルを試用することができます。Oracle 1Z0-052試験問題は定期的にアップデートしています。
下記はOracle 11g 資格1Z0-052問題集の部分デモをご参考ください。
1.The instance abnormally terminates because of a power outage.
Which statement is true about redo log files during instance recovery?
A. Inactive and current redo log files are required to accomplish recovery
B. Online and archived redo files are required to accomplish instance recovery
C. All redo log entries after the last checkpoint are applied from redo log files to data files
D. All redo log entries recorded in the current log file until the checkpoint position are applied to data files
Answer: C
2.Examine the command:
SQL>ALTER USR skd ACCOUNT LOCK;
Which two statements are true after the command is executed.? (Choose two.)
A. The SKD user cannot log in to the database instance
B. The objects owned by the SKD user are not accessible to any user
C. The other users can access the objects owned by the SKD user, on which they have access
D. The password for the SKD user expires and the user is forced to change the password at the next login
Answer: AC
3.For which database operation would you need the database to be in the MOUNT state?
A. Renaming the control files
B. Re-creating the control files
C. Dropping a user in your database
D. Dropping a tablespace in your database
E. Configuring the database instance to operate in the ARCHIVELOG or NOARCHIVELOG modes
Answer: E
4.The job to gather optimizer statistics for objects runs as part of the automatic maintenance window in
your database instance. At a certain point of time, the maintenance window closes before the statistics
are gathered for all objects.
Which statement is true in this scenario?
A. The statistics collection continues until all objects are processed.
B. The job is terminated and the statistics collected are restored to a time before the job started.
C. This produces an error and the statistics collected are locked until the next time that the maintenance
window is opened.
D. The job is terminated and the statistics for the remaining objects are collected the next time that the
maintenance window is opened.
Answer: D
5.You want to move all objects of the APPS user in the test database to the DB_USR schema of the
production database.
Which option of IMPDP would you use to accomplish this task?
A. FULL
B. SCHEMAS
C. TRANSFORM
D. REMAP_SCHEMA
E. REMAP_TABLESPACE
Answer: D
6.You executed the following command to create a password file in the database server:
$ orapwd file = orapworcl entries = 5 ignorecase=N
Which statement describes the purpose of the above password file?
A. It records usernames and passwords of users when granted the DBA role
B. It contains usernames and passwords of users for whom auditing is enabled
C. It is used by Oracle to authenticate users for remote database administrator
D. It records usernames and passwords of all users when they are added to OSDBA or OSOPER
operating groups
Answer: C
7.Which two statements are true regarding the MRKT tablespace? (Choose two.)
SQL> CREATE BIGFILE TABLESPACE MRKT
2 DATAFILE '/u01/app/oracle/oradata/orcl/mrkt.dbf' size 10M LOGGING 3 EXTENT MANAGEMENT
LOCAL SEGMENT SPACE MANAGEMENT AUTO; Tablespace created.
SQL> ALTER DATABASE DEFAULT TABLESPACE MRKT;
Database altered.
A. No more data files can be added to the tablespace.
B. Segment space is managed by free lists in the tablespace.
C. A user created without being assigned a default tablespace uses this tablespace.
D. The tablespace can be dropped with the current setting with segments present in it.
Answer: AC
8.After performing a clean shut down of the database instance for maintenance, you mount the database
and then execute a command to open the database:
SQL> ALTER DATABASE OPEN;
Which two statements are true? (Choose two.)
A. The online redo log files and online data files are opened
B. All the online data files headers are checked for consistency
C. Instance recovery is performed before opening the database
D. The path and existence of all the log file members are checked
Answer: AB
9.Examine the command that is used to create a table:
SQL> CREATE TABLE orders (
oid NUMBER(6) PRIMARY KEY,
odate DATE,
ccode NUMBER (6),
oamt NUMBER(10,2)
) TABLESPACE users;
Which two statements are true about the effect of the above command? (Choose two.)
A. A CHECK constraint is created on the OID column.
B. A NOT NULL constraint is created on the OID column.
C. The ORDERS table is the only object created in the USERS tablespace.
D. The ORDERS table and a unique index are created in the USERS tablespace.
E. The ORDERS table is created in the USERS tablespace and a unique index is created on the OID
column in the SYSTEM tablespace.
Answer: BD
10.Which two statements are true about Shared SQL Area and Private SQL Area? (Choose two.)
A. Shared SQL Area will be allocated in the shared pool
B. Shared SQL Area will be allocated when a session starts
C. Shared SQL Area will be allocated in the large pool always
D. The whole of Private SQL Area will be allocated in the Program Global Area (PGA) always
E. Shared SQL Area and Private SQL Area will be allocated in the PGA or large pool
F. The number of Private SQL Area allocations is dependent on the OPEN_CURSORS parameter
Answer: AF
11.Which three statements are correct about temporary tables? (Choose three.)
A. Indexes and views can be created on temporary tables
B. Both the data and structure of temporary tables can be exported
C. Temporary tables are always created in a user's temporary tablespace
D. The data inserted into a temporary table in a session is available to other sessions
E. Data Manipulation Language (DML) locks are never acquired on the data of temporary tables
Answer: ACE
12.Which two kinds of failures make the Data Recovery Advisor (DRA) generate a manual checklist?
(Choose two.)
A. Failure when no standby database is configured
B. Failure because a data file is renamed accidentally
C. Failure that requires no archive logs to be applied for recovery
D. Failure due to loss of connectivity-for example, an unplugged disk cable
Answer: BD
あなたの1Z0-052 pdfの質問に有効です、私は通過後の1Z0-052の練習の質問と同様にすべてのqと読んだことがあります。私はあなたの自由な1Z0-052ソフトウェアのように、それは私に触れて、実際の試験環境を助けました。ktestに感謝します。
人性化のサービス、よくお客様の立場から考えて、もっといいサービスを提供することはktestの信念です。 お客様がOracle 11g資格 1Z0-052問題集を購入する前に無料でOracle 1Z0-052問題集のサンプルを試用することができます。Oracle 1Z0-052試験問題は定期的にアップデートしています。
下記はOracle 11g 資格1Z0-052問題集の部分デモをご参考ください。
1.The instance abnormally terminates because of a power outage.
Which statement is true about redo log files during instance recovery?
A. Inactive and current redo log files are required to accomplish recovery
B. Online and archived redo files are required to accomplish instance recovery
C. All redo log entries after the last checkpoint are applied from redo log files to data files
D. All redo log entries recorded in the current log file until the checkpoint position are applied to data files
Answer: C
2.Examine the command:
SQL>ALTER USR skd ACCOUNT LOCK;
Which two statements are true after the command is executed.? (Choose two.)
A. The SKD user cannot log in to the database instance
B. The objects owned by the SKD user are not accessible to any user
C. The other users can access the objects owned by the SKD user, on which they have access
D. The password for the SKD user expires and the user is forced to change the password at the next login
Answer: AC
3.For which database operation would you need the database to be in the MOUNT state?
A. Renaming the control files
B. Re-creating the control files
C. Dropping a user in your database
D. Dropping a tablespace in your database
E. Configuring the database instance to operate in the ARCHIVELOG or NOARCHIVELOG modes
Answer: E
4.The job to gather optimizer statistics for objects runs as part of the automatic maintenance window in
your database instance. At a certain point of time, the maintenance window closes before the statistics
are gathered for all objects.
Which statement is true in this scenario?
A. The statistics collection continues until all objects are processed.
B. The job is terminated and the statistics collected are restored to a time before the job started.
C. This produces an error and the statistics collected are locked until the next time that the maintenance
window is opened.
D. The job is terminated and the statistics for the remaining objects are collected the next time that the
maintenance window is opened.
Answer: D
5.You want to move all objects of the APPS user in the test database to the DB_USR schema of the
production database.
Which option of IMPDP would you use to accomplish this task?
A. FULL
B. SCHEMAS
C. TRANSFORM
D. REMAP_SCHEMA
E. REMAP_TABLESPACE
Answer: D
6.You executed the following command to create a password file in the database server:
$ orapwd file = orapworcl entries = 5 ignorecase=N
Which statement describes the purpose of the above password file?
A. It records usernames and passwords of users when granted the DBA role
B. It contains usernames and passwords of users for whom auditing is enabled
C. It is used by Oracle to authenticate users for remote database administrator
D. It records usernames and passwords of all users when they are added to OSDBA or OSOPER
operating groups
Answer: C
7.Which two statements are true regarding the MRKT tablespace? (Choose two.)
SQL> CREATE BIGFILE TABLESPACE MRKT
2 DATAFILE '/u01/app/oracle/oradata/orcl/mrkt.dbf' size 10M LOGGING 3 EXTENT MANAGEMENT
LOCAL SEGMENT SPACE MANAGEMENT AUTO; Tablespace created.
SQL> ALTER DATABASE DEFAULT TABLESPACE MRKT;
Database altered.
A. No more data files can be added to the tablespace.
B. Segment space is managed by free lists in the tablespace.
C. A user created without being assigned a default tablespace uses this tablespace.
D. The tablespace can be dropped with the current setting with segments present in it.
Answer: AC
8.After performing a clean shut down of the database instance for maintenance, you mount the database
and then execute a command to open the database:
SQL> ALTER DATABASE OPEN;
Which two statements are true? (Choose two.)
A. The online redo log files and online data files are opened
B. All the online data files headers are checked for consistency
C. Instance recovery is performed before opening the database
D. The path and existence of all the log file members are checked
Answer: AB
9.Examine the command that is used to create a table:
SQL> CREATE TABLE orders (
oid NUMBER(6) PRIMARY KEY,
odate DATE,
ccode NUMBER (6),
oamt NUMBER(10,2)
) TABLESPACE users;
Which two statements are true about the effect of the above command? (Choose two.)
A. A CHECK constraint is created on the OID column.
B. A NOT NULL constraint is created on the OID column.
C. The ORDERS table is the only object created in the USERS tablespace.
D. The ORDERS table and a unique index are created in the USERS tablespace.
E. The ORDERS table is created in the USERS tablespace and a unique index is created on the OID
column in the SYSTEM tablespace.
Answer: BD
10.Which two statements are true about Shared SQL Area and Private SQL Area? (Choose two.)
A. Shared SQL Area will be allocated in the shared pool
B. Shared SQL Area will be allocated when a session starts
C. Shared SQL Area will be allocated in the large pool always
D. The whole of Private SQL Area will be allocated in the Program Global Area (PGA) always
E. Shared SQL Area and Private SQL Area will be allocated in the PGA or large pool
F. The number of Private SQL Area allocations is dependent on the OPEN_CURSORS parameter
Answer: AF
11.Which three statements are correct about temporary tables? (Choose three.)
A. Indexes and views can be created on temporary tables
B. Both the data and structure of temporary tables can be exported
C. Temporary tables are always created in a user's temporary tablespace
D. The data inserted into a temporary table in a session is available to other sessions
E. Data Manipulation Language (DML) locks are never acquired on the data of temporary tables
Answer: ACE
12.Which two kinds of failures make the Data Recovery Advisor (DRA) generate a manual checklist?
(Choose two.)
A. Failure when no standby database is configured
B. Failure because a data file is renamed accidentally
C. Failure that requires no archive logs to be applied for recovery
D. Failure due to loss of connectivity-for example, an unplugged disk cable
Answer: BD
あなたの1Z0-052 pdfの質問に有効です、私は通過後の1Z0-052の練習の質問と同様にすべてのqと読んだことがあります。私はあなたの自由な1Z0-052ソフトウェアのように、それは私に触れて、実際の試験環境を助けました。ktestに感謝します。
タグ：1Z0-052問題集 Oracle
2018最新なMicrosoft MCSE資格MB6-895試験問題集 [Microsoft]
ktestのMicrosoft MCSE資格 MB6-895試験問題集について、1回全て読み通したあと、MB6-895問題と解答だけ解くことを1回繰り返します。
MB6-895試験情報：
配信開始：2017年11月3日
試験言語：英語、日本語
対象者：ITプロフェッショナル、インフォメーションワーカー
テクノロジー：Microsoft Dynamics 365（ファイナンスおよび運用用）
認定資格：MCP、MCSE
ktestのMicrosoft MCSE MB6-895問題集を勉強したら、しっかり勉強すれば初心者でも合格できます。
ktestのMicrosoft MCSE MB6-895試験材料の使用だけやっていれば受けてもいいと思います。
ktestのMicrosoft MCSE MB6-895参考書がカバーする範囲から出題されます。
同じようなMicrosoft MCSE MB6-895問題が出題されるので、確認しておいたほうがいいと思います。
ktestのMicrosoft MCSE MB6-895勉強資料で1日ほど勉強すると、試験に合格できます。
MB6-895出題範囲と比率：
コア財務モジュールを設定および構成します。 （25-30％）
主要な財務モジュールの日次手続きを管理する。 （25-30％）
Budgetingモジュールを設定、構成、使用します。 （20-25％）
財務モジュールの定期的およびクローズ手順を管理します。 （20-25％）
MB6-895を受験する場合、ktestのMicrosoft MCSE MB6-895問題集は必ず完璧にしておくことが重要になります。
ktestのMB6-895問題集を勉強したら、しっかり勉強すれば初心者でも合格できます。
弊社のMicrosoft MCSE MB6-895問題集受験内容が理解できれば合格できると思います。
最新のMB6-895問題集を理解し覚えていれば合格すると思います。
ktestのMicrosoft MCSE MB6-895問題集を通じて、一緒にこの挑戦を受け入れるために、長い歴史があります。
ktestのMicrosoft MCSE MB6-895問題集を使用すると、勉強期間は12時間ぐらいに、試験に合格することができます。
ktestのMicrosoft MCSE MB6-895問題集を勉強したら、試験内容を繰り返すことができるようになります。
MB6-895試験情報：
配信開始：2017年11月3日
試験言語：英語、日本語
対象者：ITプロフェッショナル、インフォメーションワーカー
テクノロジー：Microsoft Dynamics 365（ファイナンスおよび運用用）
認定資格：MCP、MCSE
ktestのMicrosoft MCSE MB6-895問題集を勉強したら、しっかり勉強すれば初心者でも合格できます。
ktestのMicrosoft MCSE MB6-895試験材料の使用だけやっていれば受けてもいいと思います。
ktestのMicrosoft MCSE MB6-895参考書がカバーする範囲から出題されます。
同じようなMicrosoft MCSE MB6-895問題が出題されるので、確認しておいたほうがいいと思います。
ktestのMicrosoft MCSE MB6-895勉強資料で1日ほど勉強すると、試験に合格できます。
MB6-895出題範囲と比率：
コア財務モジュールを設定および構成します。 （25-30％）
主要な財務モジュールの日次手続きを管理する。 （25-30％）
Budgetingモジュールを設定、構成、使用します。 （20-25％）
財務モジュールの定期的およびクローズ手順を管理します。 （20-25％）
MB6-895を受験する場合、ktestのMicrosoft MCSE MB6-895問題集は必ず完璧にしておくことが重要になります。
ktestのMB6-895問題集を勉強したら、しっかり勉強すれば初心者でも合格できます。
弊社のMicrosoft MCSE MB6-895問題集受験内容が理解できれば合格できると思います。
最新のMB6-895問題集を理解し覚えていれば合格すると思います。
ktestのMicrosoft MCSE MB6-895問題集を通じて、一緒にこの挑戦を受け入れるために、長い歴史があります。
ktestのMicrosoft MCSE MB6-895問題集を使用すると、勉強期間は12時間ぐらいに、試験に合格することができます。
ktestのMicrosoft MCSE MB6-895問題集を勉強したら、試験内容を繰り返すことができるようになります。
最新CCNP Wireless 300-370勉強資料の出題範囲と比率 [Cisco]
ktestのCisco CCNP Wireless 300-370学習材料は受験生の皆様により高いスピードを持っているかつ効率的なサービスを提供することにずっと力を尽くしています。
弊社のCisco CCNP Wireless 300-370勉強資料は特別にデザインしてできるだけあなたの仕事の効率を改善するのソフトです。
Cisco CCNP Wireless資格 300-370質問と回答を検討し、候補者の大多数の重大な利益を提供するためにコミットしています。
試験番号 300-370
関連資格 CCNP Wireless
試験時間 90 分 (60 - 70 問)
試験言語 英語
試験登録 Pearson VUE
試験ポリシー 認定試験ポリシーおよび要件
試験チュートリアル 出題形式
300-370 Troubleshooting Cisco Wireless Enterprise Networks（WITSHOOT）は、CCNP Wireless 認定に関する試験であり、試験時間は 90 分、問題数は 60 〜 70 問です。この試験では、エンタープライズ ワイヤレス インフラストラクチャおよび関連サービスのトラブルシューティングと最適化に加え、クライアントの接続、パフォーマンス、RF の問題を特定して解決するために必要なツールや手法の知識が問われます。 受験者は、受験準備として Troubleshooting Cisco Wireless Enterprise Networks（WITSHOOT）コースを受講できます。
300-370出題範囲と比率：
1.0 トラブルシューティング手法 10%
2.0 AP 結合問題をトラブルシューティングする 15%
3.0 クライアント接続に関する問題をトラブルシューティングする 20%
4.0 RF インターフェイスを特定し、配置する 13%
5.0 クライアントのパフォーマンスに関する問題をトラブルシューティングする 17%
6.0 一般的なトラブルシューティングツールによる出力に基づいた一般的な有線インフラストラクチャに関する問題特定する 15%
7.0 WLC と AP 高可用性に関する問題をトラブルシューティングする 10%
最新のCisco CCNP Wireless 300-370勉強資料はITの従業員を雇用する多くのよく知られているIT企業の基準となります。
弊社のCisco CCNP Wireless 300-370（Troubleshooting Cisco Wireless Enterprise Networks）試験資料を手に入れると、あなたが美しい明日を迎えることと信じています。
弊社のCisco CCNP Wireless 300-370問題集を使えば、試験に合格するために豊富なITの知識と経験を習得することができます。
300-370無料サンプルをダウンロード部分最初にすることができます。
完全なCisco CCNP Wireless 300-370試験準備をして、気楽に試験を受かることができるようになります。
もし、Cisco CCNP Wireless 300-370試験に失敗したら全額で返金いたしてまた一年の無料なアップデートいたします。
While reviewing CleanAir data in Cisco Prime Infrastructure, an engineer notices that a wideband jammer is not sending its Interferer Security Trap correctly. The engineer determines that the default seventy level has been changed. Which value does the engineer select to reset the seventy level to its factory setting?
A.informational
B.major
C.minor
D.warning
E.critical
Answer: D
An engineer is using various techniques to discover and isolate rogues on the network. For which technique must the engineer consider legal ramifications?
A.rogue AP containment
B.RF detection
C.switch port tracing
D.wire detection
E.Cisco Prime Infrastructure location services
Answer: A
Which Cisco WLC debug command allows you to determine if the certificate process is failing in the CAPWAP messages?
A.debug pm pki enable
B.debug cert events enable
C.debug capwap events enable
D.debug capwap packet enable
E.debug capwap errors enable
Answer: E
Which channel width is the maximum that can be obtained by bonding two 802.11 ac subchannels according to US regulations?
A.160 MHz
B.120 MHz
C.84 MHz
D.240 MHz
Answer: A
A wireless user is experiencing connectivity issues with their Mac OS laptop. If the Mac is exhibiting the behavior of a "sticky client," how can the tech verity which AP the user is currently connected to?
A.Hold shift while clicking the wireless icon.
B.Hold option while clicking the wireless icon.
C.Hold control while clicking the wireless icon.
D.Hold command while clicking the wireless icon.
Answer: B
You have successfully configured HA and SSO using two Cisco 5508 Wireless LAN Controllers. You are able to access the Active Primary WLC but are unable to access the Secondary Standby WLC. Which two methods will allow you to access the standby unit? (Choose two.)
A.Via SSH to the Redundancy Management Interface.
B.Via Service Port Interface.
C.Via SSH to the Management Interface.
D.Via console connection.
Answer: CD
An engineer has configured 802 1x for the network and all but one of the APs are passing authentication. Which configuration is causing the failure?
A.The AP has override global credentials checked.
B.The switch AAA credentials do not match what is configured on ISE.
C.The controller 802 1x supplicant credentials do not match what is configured on ISE
D.EAP-FAST is configured on ISE for this AP.
Answer: A
An engineer is troubleshooting AP join issues on a wireless infrastructure. While gathering debugs, the engineer notices that one of the commands may generate an excessive an excessive amount of data on the console. Which command causes this to occur?
A.debug capwap detail enable
B.debug capwap errors enable
C.debug capwap info enable
D.debug capwap events enable
E.debug capwap packet enable F.debug capwap payload enable
Answer: B
Which ports require unrestricted port access for CleanAir RF spectrum analysis between the AP and Cisco Spectrum Expert?
A.UDP 5246 and 5247
B.UDP 37540 and 37550
C.TCP 16113 and 16114
D.TCP 37540 and 37550
E.TCP 5246 and 5247
F.UDP 16113and 16114
Answer: D
弊社のCisco CCNP Wireless 300-370勉強資料は特別にデザインしてできるだけあなたの仕事の効率を改善するのソフトです。
Cisco CCNP Wireless資格 300-370質問と回答を検討し、候補者の大多数の重大な利益を提供するためにコミットしています。
試験番号 300-370
関連資格 CCNP Wireless
試験時間 90 分 (60 - 70 問)
試験言語 英語
試験登録 Pearson VUE
試験ポリシー 認定試験ポリシーおよび要件
試験チュートリアル 出題形式
300-370 Troubleshooting Cisco Wireless Enterprise Networks（WITSHOOT）は、CCNP Wireless 認定に関する試験であり、試験時間は 90 分、問題数は 60 〜 70 問です。この試験では、エンタープライズ ワイヤレス インフラストラクチャおよび関連サービスのトラブルシューティングと最適化に加え、クライアントの接続、パフォーマンス、RF の問題を特定して解決するために必要なツールや手法の知識が問われます。 受験者は、受験準備として Troubleshooting Cisco Wireless Enterprise Networks（WITSHOOT）コースを受講できます。
300-370出題範囲と比率：
1.0 トラブルシューティング手法 10%
2.0 AP 結合問題をトラブルシューティングする 15%
3.0 クライアント接続に関する問題をトラブルシューティングする 20%
4.0 RF インターフェイスを特定し、配置する 13%
5.0 クライアントのパフォーマンスに関する問題をトラブルシューティングする 17%
6.0 一般的なトラブルシューティングツールによる出力に基づいた一般的な有線インフラストラクチャに関する問題特定する 15%
7.0 WLC と AP 高可用性に関する問題をトラブルシューティングする 10%
最新のCisco CCNP Wireless 300-370勉強資料はITの従業員を雇用する多くのよく知られているIT企業の基準となります。
弊社のCisco CCNP Wireless 300-370（Troubleshooting Cisco Wireless Enterprise Networks）試験資料を手に入れると、あなたが美しい明日を迎えることと信じています。
弊社のCisco CCNP Wireless 300-370問題集を使えば、試験に合格するために豊富なITの知識と経験を習得することができます。
300-370無料サンプルをダウンロード部分最初にすることができます。
完全なCisco CCNP Wireless 300-370試験準備をして、気楽に試験を受かることができるようになります。
もし、Cisco CCNP Wireless 300-370試験に失敗したら全額で返金いたしてまた一年の無料なアップデートいたします。
While reviewing CleanAir data in Cisco Prime Infrastructure, an engineer notices that a wideband jammer is not sending its Interferer Security Trap correctly. The engineer determines that the default seventy level has been changed. Which value does the engineer select to reset the seventy level to its factory setting?
A.informational
B.major
C.minor
D.warning
E.critical
Answer: D
An engineer is using various techniques to discover and isolate rogues on the network. For which technique must the engineer consider legal ramifications?
A.rogue AP containment
B.RF detection
C.switch port tracing
D.wire detection
E.Cisco Prime Infrastructure location services
Answer: A
Which Cisco WLC debug command allows you to determine if the certificate process is failing in the CAPWAP messages?
A.debug pm pki enable
B.debug cert events enable
C.debug capwap events enable
D.debug capwap packet enable
E.debug capwap errors enable
Answer: E
Which channel width is the maximum that can be obtained by bonding two 802.11 ac subchannels according to US regulations?
A.160 MHz
B.120 MHz
C.84 MHz
D.240 MHz
Answer: A
A wireless user is experiencing connectivity issues with their Mac OS laptop. If the Mac is exhibiting the behavior of a "sticky client," how can the tech verity which AP the user is currently connected to?
A.Hold shift while clicking the wireless icon.
B.Hold option while clicking the wireless icon.
C.Hold control while clicking the wireless icon.
D.Hold command while clicking the wireless icon.
Answer: B
You have successfully configured HA and SSO using two Cisco 5508 Wireless LAN Controllers. You are able to access the Active Primary WLC but are unable to access the Secondary Standby WLC. Which two methods will allow you to access the standby unit? (Choose two.)
A.Via SSH to the Redundancy Management Interface.
B.Via Service Port Interface.
C.Via SSH to the Management Interface.
D.Via console connection.
Answer: CD
An engineer has configured 802 1x for the network and all but one of the APs are passing authentication. Which configuration is causing the failure?
A.The AP has override global credentials checked.
B.The switch AAA credentials do not match what is configured on ISE.
C.The controller 802 1x supplicant credentials do not match what is configured on ISE
D.EAP-FAST is configured on ISE for this AP.
Answer: A
An engineer is troubleshooting AP join issues on a wireless infrastructure. While gathering debugs, the engineer notices that one of the commands may generate an excessive an excessive amount of data on the console. Which command causes this to occur?
A.debug capwap detail enable
B.debug capwap errors enable
C.debug capwap info enable
D.debug capwap events enable
E.debug capwap packet enable F.debug capwap payload enable
Answer: B
Which ports require unrestricted port access for CleanAir RF spectrum analysis between the AP and Cisco Spectrum Expert?
A.UDP 5246 and 5247
B.UDP 37540 and 37550
C.TCP 16113 and 16114
D.TCP 37540 and 37550
E.TCP 5246 and 5247
F.UDP 16113and 16114
Answer: D
2018 最新210-260認定試験,210-260pdf,210-260exam,210-260試験問題集 [Cisco]
210-260認定試験
Which two services define cloud networks? (Choose two.)
A. Infrastructure as a Service
B. Platform as a Service
C. Security as a Service
D. Compute as a Service
E. Tenancy as a Service
Answer: A,B
In which two situations should you use out-of-band management? (Choose two.)
A. when a network device fails to forward packets
B. when you require ROMMON access
C. when management applications need concurrent access to the device
D. when you require administrator access from multiple locations
E. when the control plane fails to respond
Answer: A,B
,210-260pdf
In which three ways does the TACACS protocol differ from RADIUS? (Choose three.)
A. TACACS uses TCP to communicate with the NAS.
B. TACACS can encrypt the entire packet that is sent to the NAS.
C. TACACS supports per-command authorization.
D. TACACS authenticates and authorizes simultaneously, causing fewer packets to be transmitted.
E. TACACS uses UDP to communicate with the NAS.
F. TACACS encrypts only the password field in an authentication packet.
Answer: A,B,C
According to Cisco best practices, which three protocols should the default ACL allow on an access port to enable wired BYOD devices to supply valid credentials and connect to the network? (Choose three.)
A. BOOTP
B. TFTP
C. DNS
D. MAB
E. HTTP
F. 802.1x
Answer: A,B,C
Which two next-generation encryption algorithms does Cisco recommend? (Choose two.)
A. AES
B. 3DES
C. DES
D. MD5
E. DH-1024
F. SHA-384
Answer: A,F
210-260exam
Which three ESP fields can be encrypted during transmission? (Choose three.)
A. Security Parameter Index
B. Sequence Number
C. MAC Address
D. Padding
E. Pad Length
F. Next Header
Answer: D,E,F
What are two default Cisco IOS privilege levels? (Choose two.)
A. 0
B. 1
C. 5
D. 7
E. 10
F. 15
Answer: B,F
Which two authentication types does OSPF support? (Choose two.)
A. plaintext
B. MD5
C. HMAC
D. AES 256
E. SHA-1
F. DES
Answer: A,B
210-260試験問題集
Which two features do CoPP and CPPr use to protect the control plane? (Choose two.)
A. QoS
B. traffic classification
C. access lists
D. policy maps
E. class maps
F. Cisco Express Forwarding
Answer: A,B
Which two statements about stateless firewalls are true? (Choose two.)
A. They compare the 5-tuple of each incoming packet against configurable rules.
B. They cannot track connections.
C. They are designed to work most efficiently with stateless protocols such as HTTP or HTTPS.
D. Cisco IOS cannot implement them because the platform is stateful by nature.
E. The Cisco ASA is implicitly stateless because it blocks all traffic by default.
Answer: A,B
Which three statements about host-based IPS are true? (Choose three.)
A. It can view encrypted files.
B. It can have more restrictive policies than network-based IPS.
C. It can generate alerts based on behavior at the desktop level.
D. It can be deployed at the perimeter.
E. It uses signature-based policies.
F. It works with deployed firewalls.
Answer: A,B,C
What three actions are limitations when running IPS in promiscuous mode? (Choose three.)
A. deny attacker
B. deny packet
C. modify packet
D. request block connection
E. request block host
F. reset TCP connection
Answer: A,B,C
When an IPS detects an attack, which action can the IPS take to prevent the attack from spreading?
A. Deny the connection inline.
B. Perform a Layer 6 reset.
C. Deploy an antimalware system.
D. Enable bypass mode.
Answer: A
What is an advantage of implementing a Trusted Platform Module for disk encryption?
A. It provides hardware authentication.
B. It allows the hard disk to be transferred to another device without requiring re-encryption.dis
C. It supports a more complex encryption algorithm than other disk-encryption technologies.
D. It can protect against single points of failure.
Answer: A
What is the purpose of the Integrity component of the CIA triad?
A. to ensure that only authorized parties can modify data
B. to determine whether data is relevant
C. to create a process for accessing data
D. to ensure that only authorized parties can view data
Answer: A
In a security context, which action can you take to address compliance?
A. Implement rules to prevent a vulnerability.
B. Correct or counteract a vulnerability.
C. Reduce the severity of a vulnerability.
D. Follow directions from the security appliance manufacturer to remediate a vulnerability.
Answer: A
Which type of secure connectivity does an extranet provide?
A. other company networks to your company network
B. remote branch offices to your company network
C. your company network to the Internet
D. new networks to your company network
Answer: A
Which tool can an attacker use to attempt a DDoS attack?
A. botnet
B. Trojan horse
C. virus
D. adware
Answer: A
What type of security support is provided by the Open Web Application Security Project?
A. Education about common Web site vulnerabilities.
B. A Web site security framework.
C. A security discussion forum for Web site developers.
D. Scoring of common vulnerabilities and exposures.
Answer: A
What type of attack was the Stuxnet virus?
A. cyber warfare
B. hacktivism
C. botnet
D. social engineering
Answer: A
Which two services define cloud networks? (Choose two.)
A. Infrastructure as a Service
B. Platform as a Service
C. Security as a Service
D. Compute as a Service
E. Tenancy as a Service
Answer: A,B
In which two situations should you use out-of-band management? (Choose two.)
A. when a network device fails to forward packets
B. when you require ROMMON access
C. when management applications need concurrent access to the device
D. when you require administrator access from multiple locations
E. when the control plane fails to respond
Answer: A,B
,210-260pdf
In which three ways does the TACACS protocol differ from RADIUS? (Choose three.)
A. TACACS uses TCP to communicate with the NAS.
B. TACACS can encrypt the entire packet that is sent to the NAS.
C. TACACS supports per-command authorization.
D. TACACS authenticates and authorizes simultaneously, causing fewer packets to be transmitted.
E. TACACS uses UDP to communicate with the NAS.
F. TACACS encrypts only the password field in an authentication packet.
Answer: A,B,C
According to Cisco best practices, which three protocols should the default ACL allow on an access port to enable wired BYOD devices to supply valid credentials and connect to the network? (Choose three.)
A. BOOTP
B. TFTP
C. DNS
D. MAB
E. HTTP
F. 802.1x
Answer: A,B,C
Which two next-generation encryption algorithms does Cisco recommend? (Choose two.)
A. AES
B. 3DES
C. DES
D. MD5
E. DH-1024
F. SHA-384
Answer: A,F
210-260exam
Which three ESP fields can be encrypted during transmission? (Choose three.)
A. Security Parameter Index
B. Sequence Number
C. MAC Address
D. Padding
E. Pad Length
F. Next Header
Answer: D,E,F
What are two default Cisco IOS privilege levels? (Choose two.)
A. 0
B. 1
C. 5
D. 7
E. 10
F. 15
Answer: B,F
Which two authentication types does OSPF support? (Choose two.)
A. plaintext
B. MD5
C. HMAC
D. AES 256
E. SHA-1
F. DES
Answer: A,B
210-260試験問題集
Which two features do CoPP and CPPr use to protect the control plane? (Choose two.)
A. QoS
B. traffic classification
C. access lists
D. policy maps
E. class maps
F. Cisco Express Forwarding
Answer: A,B
Which two statements about stateless firewalls are true? (Choose two.)
A. They compare the 5-tuple of each incoming packet against configurable rules.
B. They cannot track connections.
C. They are designed to work most efficiently with stateless protocols such as HTTP or HTTPS.
D. Cisco IOS cannot implement them because the platform is stateful by nature.
E. The Cisco ASA is implicitly stateless because it blocks all traffic by default.
Answer: A,B
Which three statements about host-based IPS are true? (Choose three.)
A. It can view encrypted files.
B. It can have more restrictive policies than network-based IPS.
C. It can generate alerts based on behavior at the desktop level.
D. It can be deployed at the perimeter.
E. It uses signature-based policies.
F. It works with deployed firewalls.
Answer: A,B,C
What three actions are limitations when running IPS in promiscuous mode? (Choose three.)
A. deny attacker
B. deny packet
C. modify packet
D. request block connection
E. request block host
F. reset TCP connection
Answer: A,B,C
When an IPS detects an attack, which action can the IPS take to prevent the attack from spreading?
A. Deny the connection inline.
B. Perform a Layer 6 reset.
C. Deploy an antimalware system.
D. Enable bypass mode.
Answer: A
What is an advantage of implementing a Trusted Platform Module for disk encryption?
A. It provides hardware authentication.
B. It allows the hard disk to be transferred to another device without requiring re-encryption.dis
C. It supports a more complex encryption algorithm than other disk-encryption technologies.
D. It can protect against single points of failure.
Answer: A
What is the purpose of the Integrity component of the CIA triad?
A. to ensure that only authorized parties can modify data
B. to determine whether data is relevant
C. to create a process for accessing data
D. to ensure that only authorized parties can view data
Answer: A
In a security context, which action can you take to address compliance?
A. Implement rules to prevent a vulnerability.
B. Correct or counteract a vulnerability.
C. Reduce the severity of a vulnerability.
D. Follow directions from the security appliance manufacturer to remediate a vulnerability.
Answer: A
Which type of secure connectivity does an extranet provide?
A. other company networks to your company network
B. remote branch offices to your company network
C. your company network to the Internet
D. new networks to your company network
Answer: A
Which tool can an attacker use to attempt a DDoS attack?
A. botnet
B. Trojan horse
C. virus
D. adware
Answer: A
What type of security support is provided by the Open Web Application Security Project?
A. Education about common Web site vulnerabilities.
B. A Web site security framework.
C. A security discussion forum for Web site developers.
D. Scoring of common vulnerabilities and exposures.
Answer: A
What type of attack was the Stuxnet virus?
A. cyber warfare
B. hacktivism
C. botnet
D. social engineering
Answer: A
最新300-360問題集：Designing Cisco Wireless Enterprise Networks [Cisco]
あなただけの模擬試験を行うために弊社のCisco CCNP Wireless 300-360問題集を取得する必要があり、あなたは成功に300-360試験に合格することができます。
弊社のCisco CCNP Wireless 300-360練習問題集を使用すると、常に高いレベルに到達するための独自の知識を向上させています。
弊社のCisco CCNP Wireless資格 300-360 問題集（Designing Cisco Wireless Enterprise Networks）試験資料は自分の知識と技能を高めることに助けになれることだけでなく、さまざまな条件であなたのキャリアを助けることもできます。
弊社のCisco CCNP Wireless 300-360受験対策を使って、10～20時間の独学だけで、お客様の時間と精力を節約して、一発合格が可能です。
試験番号 300-360
関連資格 CCNP Wireless
試験時間 90 分 (60 - 70 問)
試験言語 英語
試験登録 Pearson VUE
試験ポリシー 認定試験ポリシーおよび要件
試験チュートリアル 出題形式
300-360 Designing Cisco Wireless Enterprise Networks（WIDESIGN）は、CCNP Wireless 認定に関する試験であり、試験時間は 90 分、問題数は 60 〜 70 問です。この試験では、顧客とアプリケーションの要件の特定、予測ワイヤレス設計原則の適用、エンタープライズ ワイヤレス ネットワークの設計および最適化に必要なサイト調査の実施に関する知識が問われます。
12% 1.0 WLAN インストールに関連する
顧客要件を取得する
12% 2.0 WLAN 導入に関連する施設のタイプと制約事項を特定する
14% 3.0 WLAN の予測設計
14% 4.0 導入後のサイト調査
15% 5.0 導入後のサイト調査
15% 6.0 ワイヤレス ネットワークのインフラストラクチャを設計する
18% 7.0 リアルタイム アプリケーション用のワイヤレス アーキテクチャを説明し、設計する
A Cisco 7925 phone at a client¡¯s location is not registering with CUCM. The engineer analyzes a packet capture, sees that the phone receives an IP, and downloads the proper configuration file from TFTP successfully.
What type of messages should the phone be sending at this point?
A. H.245
B. H.323
C. MCGP
D. SCCP
Answer: D
After the completion of a site survey with Ekahau Site Survey tool, using the default color palette, it is noted that multiple areas are shown as white on the heat map when viewing 5 GHz signal strength data.
What does this indicate about the signal strength?
A. The area is below the minimum threshold configured on the tool.
B. The area is below the detectable level and indicates no RF signal.
C. The area is below -100 dBm at coverage cell edge.
D. The area is below -67 dBm at coverage cell edge.
Answer: A
An engineer must design wireless coverage in thick-walled stairwells.
Which information should the engineer refer to when determining where APs can be installed?
A. Local or National Building Code
B. IEEE
C. BICSI TDMM
D. Cisco Hardware Installation Guide
Answer: A
An engineer is performing a predictive wireless design for a medical treatment environment, which requires data and voice services.
Which of the following is a requirement for the design?
A. overlapping -72 dBm coverage from two access points
B. overlapping -67 dBm coverage from two access points
C. continuous -67 dBm coverage from one access point
D. continuous -72 dBm coverage from one access point
Answer: C
A network engineer is preparing for an office site survey with a height of 2.5 meters.
Which three components are recommended to complete the survey? (Choose three.)
A. Use APs with external antennas.
B. Use DoS attack on APs while measuring the throughput.
C. Use APs with built-in antennas.
D. Use a battery pack to power APs.
E. Use a drawing of the office space to draw AP and client placements.
F. Use APs with directional antennas.
Answer: C,D,E
An engineer is planning for a 24 Mbps data rate for a new installation.
What is the coverage area from the AP if the environment and other factors are not taken into consideration?
A. 225 feet
B. 80 feet
C. 150 feet
D. 100 feet
Answer: B
Which two options describe best practices that must be completed after a wireless installation is finished? (Choose two.)
A. Make sure that there are no spaces between the devices on the rack that the Wireless Lan Controller is installed.
B. Consult with the customer to ensure that the IT staff has a complete set of design and installation documents.
C. Make sure the customer is aware that they should consider purchasing a support contract immediately after the installation is complete.
D. Spend time with the customer to show them the controller GUI and inform them how they can reach the Cisco TAC if they have any problems.
E. Test all the customer¡¯s wireless devices and applications to ensure they are working properly.
Answer: B,E
What is a common cause for signal attenuation?
A. Cinder block wall
B. Office window
C. Metal door
D. Glass wall
Answer: C
The AP has been configured property for a VoWLAN survey The RF environment contains a noise of -87 to -90 dBm.
What is the target value for the cell edge reading?
A. -62 dBm
B. -67 dBm
C. -60 dBm
D. -70 dBm
Answer: B
An 802.11n implementation is being discussed. Users are satisfied with the potential 300450 Mbps throughput of new 802.11n APs.
Which three bandwidth requirements are used to calculate per client bandwidth through an 802.11n AP network? (Choose three.)
A. 450 Mbps throughput is the client max for 5-GHz radio.
B. Channel bonding on 5 GHz is required for a client to have a 300 Mbps WiFi link.
C. 300 Mbps throughput is the client max for 2.4-GHz radio.
D. The remaining bandwidth is divided per device when more clients are connected to one AP.
E. 100 Mbps Ethernet switch port is a potential bottleneck.
F. Clean Air helps clear noise for 802.11n channel bonding to work.
Answer: A,C,E
An engineer is performing a predictive wireless design for a carpeted office space, which requires voice capability and location services.
Which two requirements are inputs to the design? (Choose two.)
A. overlapping -67 dBm coverage from three access points
B. overlapping -75 dBm coverage from three access points
C. overlapping-72 dBm coverage from two access points
D. continuous -67 dBm coverage from one access pointe. continuous -72 dBm coverage from one access point
Answer: BD
You have a customer that is building a new campus of four 3-story buildings that you have just completed the site survey for. The customer is interested in the mount of rack space they will need to allocate in either the building MDF or in the data center for controllers. Each building is going to require 75 APs to support voice and data.
How should the controllers be deployed to provide the least number of controllers, the highest redundancy, and the easiest management?
A. Use the centralized deployment method in the data center with the N + N redundancy method.
B. Use the centralized deployment method in the data center with the N + 1 redundancy method
C. Use the centralized deployment method in the data center with the 1 + 1 redundancy method and clients SO.
D. Use the distributed deployment method in each building MDF with the N + 1 redundancy method.
E. Use the distributed deployment method in each building MDF with the N + N + 1 redundancy method.
F. Use the distributed deployment method in each building MDF with the N + N redundancy method.
Answer: B
ktestはCisco CCNP Wireless 300-360 問題集試験のための便利なサービスを提供するために、非常に良いサイトです。
弊社のCisco CCNP Wireless 300-360練習問題集を使用すると、常に高いレベルに到達するための独自の知識を向上させています。
弊社のCisco CCNP Wireless資格 300-360 問題集（Designing Cisco Wireless Enterprise Networks）試験資料は自分の知識と技能を高めることに助けになれることだけでなく、さまざまな条件であなたのキャリアを助けることもできます。
弊社のCisco CCNP Wireless 300-360受験対策を使って、10～20時間の独学だけで、お客様の時間と精力を節約して、一発合格が可能です。
試験番号 300-360
関連資格 CCNP Wireless
試験時間 90 分 (60 - 70 問)
試験言語 英語
試験登録 Pearson VUE
試験ポリシー 認定試験ポリシーおよび要件
試験チュートリアル 出題形式
300-360 Designing Cisco Wireless Enterprise Networks（WIDESIGN）は、CCNP Wireless 認定に関する試験であり、試験時間は 90 分、問題数は 60 〜 70 問です。この試験では、顧客とアプリケーションの要件の特定、予測ワイヤレス設計原則の適用、エンタープライズ ワイヤレス ネットワークの設計および最適化に必要なサイト調査の実施に関する知識が問われます。
12% 1.0 WLAN インストールに関連する
顧客要件を取得する
12% 2.0 WLAN 導入に関連する施設のタイプと制約事項を特定する
14% 3.0 WLAN の予測設計
14% 4.0 導入後のサイト調査
15% 5.0 導入後のサイト調査
15% 6.0 ワイヤレス ネットワークのインフラストラクチャを設計する
18% 7.0 リアルタイム アプリケーション用のワイヤレス アーキテクチャを説明し、設計する
A Cisco 7925 phone at a client¡¯s location is not registering with CUCM. The engineer analyzes a packet capture, sees that the phone receives an IP, and downloads the proper configuration file from TFTP successfully.
What type of messages should the phone be sending at this point?
A. H.245
B. H.323
C. MCGP
D. SCCP
Answer: D
After the completion of a site survey with Ekahau Site Survey tool, using the default color palette, it is noted that multiple areas are shown as white on the heat map when viewing 5 GHz signal strength data.
What does this indicate about the signal strength?
A. The area is below the minimum threshold configured on the tool.
B. The area is below the detectable level and indicates no RF signal.
C. The area is below -100 dBm at coverage cell edge.
D. The area is below -67 dBm at coverage cell edge.
Answer: A
An engineer must design wireless coverage in thick-walled stairwells.
Which information should the engineer refer to when determining where APs can be installed?
A. Local or National Building Code
B. IEEE
C. BICSI TDMM
D. Cisco Hardware Installation Guide
Answer: A
An engineer is performing a predictive wireless design for a medical treatment environment, which requires data and voice services.
Which of the following is a requirement for the design?
A. overlapping -72 dBm coverage from two access points
B. overlapping -67 dBm coverage from two access points
C. continuous -67 dBm coverage from one access point
D. continuous -72 dBm coverage from one access point
Answer: C
A network engineer is preparing for an office site survey with a height of 2.5 meters.
Which three components are recommended to complete the survey? (Choose three.)
A. Use APs with external antennas.
B. Use DoS attack on APs while measuring the throughput.
C. Use APs with built-in antennas.
D. Use a battery pack to power APs.
E. Use a drawing of the office space to draw AP and client placements.
F. Use APs with directional antennas.
Answer: C,D,E
An engineer is planning for a 24 Mbps data rate for a new installation.
What is the coverage area from the AP if the environment and other factors are not taken into consideration?
A. 225 feet
B. 80 feet
C. 150 feet
D. 100 feet
Answer: B
Which two options describe best practices that must be completed after a wireless installation is finished? (Choose two.)
A. Make sure that there are no spaces between the devices on the rack that the Wireless Lan Controller is installed.
B. Consult with the customer to ensure that the IT staff has a complete set of design and installation documents.
C. Make sure the customer is aware that they should consider purchasing a support contract immediately after the installation is complete.
D. Spend time with the customer to show them the controller GUI and inform them how they can reach the Cisco TAC if they have any problems.
E. Test all the customer¡¯s wireless devices and applications to ensure they are working properly.
Answer: B,E
What is a common cause for signal attenuation?
A. Cinder block wall
B. Office window
C. Metal door
D. Glass wall
Answer: C
The AP has been configured property for a VoWLAN survey The RF environment contains a noise of -87 to -90 dBm.
What is the target value for the cell edge reading?
A. -62 dBm
B. -67 dBm
C. -60 dBm
D. -70 dBm
Answer: B
An 802.11n implementation is being discussed. Users are satisfied with the potential 300450 Mbps throughput of new 802.11n APs.
Which three bandwidth requirements are used to calculate per client bandwidth through an 802.11n AP network? (Choose three.)
A. 450 Mbps throughput is the client max for 5-GHz radio.
B. Channel bonding on 5 GHz is required for a client to have a 300 Mbps WiFi link.
C. 300 Mbps throughput is the client max for 2.4-GHz radio.
D. The remaining bandwidth is divided per device when more clients are connected to one AP.
E. 100 Mbps Ethernet switch port is a potential bottleneck.
F. Clean Air helps clear noise for 802.11n channel bonding to work.
Answer: A,C,E
An engineer is performing a predictive wireless design for a carpeted office space, which requires voice capability and location services.
Which two requirements are inputs to the design? (Choose two.)
A. overlapping -67 dBm coverage from three access points
B. overlapping -75 dBm coverage from three access points
C. overlapping-72 dBm coverage from two access points
D. continuous -67 dBm coverage from one access pointe. continuous -72 dBm coverage from one access point
Answer: BD
You have a customer that is building a new campus of four 3-story buildings that you have just completed the site survey for. The customer is interested in the mount of rack space they will need to allocate in either the building MDF or in the data center for controllers. Each building is going to require 75 APs to support voice and data.
How should the controllers be deployed to provide the least number of controllers, the highest redundancy, and the easiest management?
A. Use the centralized deployment method in the data center with the N + N redundancy method.
B. Use the centralized deployment method in the data center with the N + 1 redundancy method
C. Use the centralized deployment method in the data center with the 1 + 1 redundancy method and clients SO.
D. Use the distributed deployment method in each building MDF with the N + 1 redundancy method.
E. Use the distributed deployment method in each building MDF with the N + N + 1 redundancy method.
F. Use the distributed deployment method in each building MDF with the N + N redundancy method.
Answer: B
ktestはCisco CCNP Wireless 300-360 問題集試験のための便利なサービスを提供するために、非常に良いサイトです。
2018 Juniper JN0-680最新試験情報 [JNCIP-DC]
ktest Juniper JN0-680 JNCIP-DCダンプはPDF形式とソフトウェア形式で提供されています。 Juniper JN0-680 JNCIP-DCダンプが含まれています。 これらの問題は、あなたがJuniper JN0-680試験に合格するのを助けることができる完璧なものです。 ktest Juniper JN0-680試験はすべてのシラバスと複雑な問題を網羅しています。 ktestJN0-680 JNCIP-DCダンプは、実際の試験の課題であり、あなたの考え方を変えるのに役立ちます。
Juniper JNCIP-DC資格 JN0-680の認定を受ける準備ができていますか？ データセンター、プロフェッショナル試験の準備を始めましたか？ 成功への道は、トレーニングリソースが基本的な必需品です。
ktestはJuniper JN0-680 JNCIP-DCダンプで知られています。 Juniper JN0-680 ktestのJNCIP-DCダンプは、Juniper JN0-680認定試験の知識のうち最も完全なカバー範囲を提供します。
Which protocol is used between VCF member devices to create a loop-free topology?
A. LLDP
B. MSTP
C. RSTP
D. VCCP
Answer: D
A customer notices that all traffic is traveling over a single link within their partially meshed IP Fabric using IBGP. While troubleshooting, the customer notices that the configuration is missing a configuration parameter.Which parameter would the customer use to solve this problem?
A. accept-remote-nexthop
B. advertise-peer-as
C. add-path
D. multihop
Answer: C
You have deployed a multicast server attached to a QFX5100 Series device serving as a VTEP.Which two statements are correct in this scenario? (Choose two.)
A. By default, the QFX5100 will send copies of the multicast packets to all locally attached devices in the same VLAN.
B. By default, the QFX5100 will send copies of the multicast packets to locally attached devices in the same VLAN that are interested receivers only.
C. By default, the QFX5100 will encapsulate the multicast packets in VXLAN and forward them to all remotely connected VTEPs.
D. By default, the QFX5100 will encapsulate the multicast packets in VXLAN and forward them to remotely connected VTEPs with interested receives only.
Answer: A,C
A customer has built a VXLAN using an EVPN signaling infrastructure with remote facilities with VXLAN using EVPN signaling connected to the Internet. The customer notices that the network is completely stable with no protocol errors in the underlay or overlay. The customer, however, cannot pass any application data across the network.Which statement would explain the intermittent loss?
A. There is an LACP key mismatch.
B. The MTU is exceeded.
C. The routing protocol authentication has failed.
D. The BPDU protection is invoked.
Answer: D
You are implementing a Virtual Chassis using QFX5100s and EX4300s in your data center.In this scenario, which two statements are correct? (Choose two.)
A. Only 10GbE VCP connections can be used between the QFX5100s and the EX4300s.
B. The QFX5100 devices cannot assume the line card role in the Virtual Chassis.
C. Some hardware capabilities are limited by the capabilities of the EX4300 switches.
D. The EX4300 devices can only assume a line card role in the Virtual Chassis.
Answer: C,D
Juniper JNCIP-DC資格 JN0-680の認定を受ける準備ができていますか？ データセンター、プロフェッショナル試験の準備を始めましたか？ 成功への道は、トレーニングリソースが基本的な必需品です。
ktestはJuniper JN0-680 JNCIP-DCダンプで知られています。 Juniper JN0-680 ktestのJNCIP-DCダンプは、Juniper JN0-680認定試験の知識のうち最も完全なカバー範囲を提供します。
Which protocol is used between VCF member devices to create a loop-free topology?
A. LLDP
B. MSTP
C. RSTP
D. VCCP
Answer: D
A customer notices that all traffic is traveling over a single link within their partially meshed IP Fabric using IBGP. While troubleshooting, the customer notices that the configuration is missing a configuration parameter.Which parameter would the customer use to solve this problem?
A. accept-remote-nexthop
B. advertise-peer-as
C. add-path
D. multihop
Answer: C
You have deployed a multicast server attached to a QFX5100 Series device serving as a VTEP.Which two statements are correct in this scenario? (Choose two.)
A. By default, the QFX5100 will send copies of the multicast packets to all locally attached devices in the same VLAN.
B. By default, the QFX5100 will send copies of the multicast packets to locally attached devices in the same VLAN that are interested receivers only.
C. By default, the QFX5100 will encapsulate the multicast packets in VXLAN and forward them to all remotely connected VTEPs.
D. By default, the QFX5100 will encapsulate the multicast packets in VXLAN and forward them to remotely connected VTEPs with interested receives only.
Answer: A,C
A customer has built a VXLAN using an EVPN signaling infrastructure with remote facilities with VXLAN using EVPN signaling connected to the Internet. The customer notices that the network is completely stable with no protocol errors in the underlay or overlay. The customer, however, cannot pass any application data across the network.Which statement would explain the intermittent loss?
A. There is an LACP key mismatch.
B. The MTU is exceeded.
C. The routing protocol authentication has failed.
D. The BPDU protection is invoked.
Answer: D
You are implementing a Virtual Chassis using QFX5100s and EX4300s in your data center.In this scenario, which two statements are correct? (Choose two.)
A. Only 10GbE VCP connections can be used between the QFX5100s and the EX4300s.
B. The QFX5100 devices cannot assume the line card role in the Virtual Chassis.
C. Some hardware capabilities are limited by the capabilities of the EX4300 switches.
D. The EX4300 devices can only assume a line card role in the Virtual Chassis.
Answer: C,D
2018 CCENT 100-105資格問題集 [Cisco]
IT業界の中でたくさんの野心的な専門家がいって、IT業界の中でより一層頂上まで一歩更に近く立ちたくてCiscoの100-105試験参考書に参加して認可を得たくて、Cisco の100-105試験参考書が難度の高いので合格率も比較的低いです。Ciscoの100-105試験参考書を申し込むのは賢明な選択で今のは競争の激しいIT業界では、絶えず自分を高めるべきです。しかし多くの選択肢があるので勉強者はきっと悩んでいましょう。もし、受験者は試験不合格だった、注文したCisco Interconnecting Cisco Networking Devices Part 1 (ICND1 v3.0)試験問題集料金を返金することができます。勉強者の経済が絶対に損失を被らないんです。
Ktestの100-105試験の過去問を使って、本場の100-105試験環境を作り出すことができ、自信を持って100-105試験を受けられ、楽に普段の理論や知識を発揮することができて、理解やすいです。Ktest 100-105（Cisco Interconnecting Cisco Networking Devices Part 1 (ICND1 v3.0)）試験を取得するには、CCENT資格の要件をしっかりと理解する必要があります。価値の説明についてのCCENT認定資格100-105験内容が含まれて、専門知識の学習を重心として、Ktest専門技能を強化するために開発されています。
激しい今社会では、専門的な技術を身に付けたら、大きく優位を占めることができます。IT資格業界では関連のCiscoCCENT資格認証書を持っているのは専門的な知識や経験両方も証明でございます。KtestのCiscoCCENT資格100-105試験参考書がIT認証試験対策ツールのサイトで開発した問題集はとてもIT認証試験の受験生に適用します。このCiscoCCENT資格取得には、試験に合格する必要があります。CiscoCCENT資格100-105試験の合格は関する技術的専門知識を持つことを証明できるだけでなく、試験の客観的な評価という点で、Cisco Interconnecting Cisco Networking Devices Part 1 (ICND1 v3.0)試験問題集は信頼に足る練習資料です。
Share some CCENT 100-105 exam questions and answers below.
What is the subnet address for the IP address 172.19.20.23/28?
A. 172.19.20.0
B. 172.19.20.15
C. 172.19.20.16
D. 172.19.20.20
E. 172.19.20.32
Answer: C
Which layer of the TCP/IP stack combines the OSI model physical and data link layers?
A. Internet layer
B. transport layer
C. application layer
D. network access layer
Answer: D
Topic 3: Routing Fundamentals
Which IP addresses are valid for hosts belonging to the 10.1.160.0/20 subnet? (Choose three.)
A. 10.1.168.0
B. 10.1.176.1
C. 10.1.174.255
D. 10.1.160.255
E. 10.1.160.0
F. 10.1.175.255
Answer: A, C, D
How does TCP differ from UDP? (Choose two.)
A. TCP provides best effort delivery.
B. TCP provides synchronized communication.
C. TCP segments are essentially datagrams.
D. TCP provides sequence numbering of packets.
E. TCP uses broadcast delivery.
Answer: B, D
Refer to the exhibit.
Which option describes how SwitchA will handle the frame just received?
A. It will drop the frame.
B. It will forward the frame out of port Fa0/3 only.
C. It will flood the frame out all ports.
D. It will flood the frame out of all the ports except Fa0/3.
Answer: D
Which network device functions only at Layer 1 of the OSI model?
A. Option A
B. Option B
C. Option C
D. Option D
E. Option E
Answer: B
Which three statements are true about the operation of a full-duplex Ethernet network? (Choose three.)
A. There are no collisions in full-duplex mode.
B. A dedicated switch port is required for each full-duplex node.
C. Ethernet hub ports are preconfigured for full-duplex mode.
D. In a full-duplex environment, the host network card must check for the availability of the network media before transmitting.
E. The host network card and the switch port must be capable of operating in full-duplex mode.
Answer: A,B,E
Refer to the exhibit.
All devices attached to the network are shown.
How many collision domains are present in this network?
A. 2
B. 3
C. 6
D. 9
E. 15
Answer: E
IT技術の急速な発展につれて、IT認証試験の問題は常に変更されています。したがって、Ktestの100-105試験過去問も絶えずに更新されています。それに、Ktestの教材を購入すれば、Ktestは一年間の無料アップデート,サービスを提供してあげます。問題が更新される限り、Ktestは直ちに最新版のCisco Interconnecting Cisco Networking Devices Part 1 (ICND1 v3.0)試験過去問を送ってあげます。そうすると、あなたがいつでも最新バージョンの資料を持っていることが保証されます。Ktestはあなたが試験に合格するのを助けることができるだけでなく、あなたは最新の知識を学ぶのを助けることもできます。
Ktestの100-105試験の過去問を使って、本場の100-105試験環境を作り出すことができ、自信を持って100-105試験を受けられ、楽に普段の理論や知識を発揮することができて、理解やすいです。Ktest 100-105（Cisco Interconnecting Cisco Networking Devices Part 1 (ICND1 v3.0)）試験を取得するには、CCENT資格の要件をしっかりと理解する必要があります。価値の説明についてのCCENT認定資格100-105験内容が含まれて、専門知識の学習を重心として、Ktest専門技能を強化するために開発されています。
激しい今社会では、専門的な技術を身に付けたら、大きく優位を占めることができます。IT資格業界では関連のCiscoCCENT資格認証書を持っているのは専門的な知識や経験両方も証明でございます。KtestのCiscoCCENT資格100-105試験参考書がIT認証試験対策ツールのサイトで開発した問題集はとてもIT認証試験の受験生に適用します。このCiscoCCENT資格取得には、試験に合格する必要があります。CiscoCCENT資格100-105試験の合格は関する技術的専門知識を持つことを証明できるだけでなく、試験の客観的な評価という点で、Cisco Interconnecting Cisco Networking Devices Part 1 (ICND1 v3.0)試験問題集は信頼に足る練習資料です。
Share some CCENT 100-105 exam questions and answers below.
What is the subnet address for the IP address 172.19.20.23/28?
A. 172.19.20.0
B. 172.19.20.15
C. 172.19.20.16
D. 172.19.20.20
E. 172.19.20.32
Answer: C
Which layer of the TCP/IP stack combines the OSI model physical and data link layers?
A. Internet layer
B. transport layer
C. application layer
D. network access layer
Answer: D
Topic 3: Routing Fundamentals
Which IP addresses are valid for hosts belonging to the 10.1.160.0/20 subnet? (Choose three.)
A. 10.1.168.0
B. 10.1.176.1
C. 10.1.174.255
D. 10.1.160.255
E. 10.1.160.0
F. 10.1.175.255
Answer: A, C, D
How does TCP differ from UDP? (Choose two.)
A. TCP provides best effort delivery.
B. TCP provides synchronized communication.
C. TCP segments are essentially datagrams.
D. TCP provides sequence numbering of packets.
E. TCP uses broadcast delivery.
Answer: B, D
Refer to the exhibit.
Which option describes how SwitchA will handle the frame just received?
A. It will drop the frame.
B. It will forward the frame out of port Fa0/3 only.
C. It will flood the frame out all ports.
D. It will flood the frame out of all the ports except Fa0/3.
Answer: D
Which network device functions only at Layer 1 of the OSI model?
A. Option A
B. Option B
C. Option C
D. Option D
E. Option E
Answer: B
Which three statements are true about the operation of a full-duplex Ethernet network? (Choose three.)
A. There are no collisions in full-duplex mode.
B. A dedicated switch port is required for each full-duplex node.
C. Ethernet hub ports are preconfigured for full-duplex mode.
D. In a full-duplex environment, the host network card must check for the availability of the network media before transmitting.
E. The host network card and the switch port must be capable of operating in full-duplex mode.
Answer: A,B,E
Refer to the exhibit.
All devices attached to the network are shown.
How many collision domains are present in this network?
A. 2
B. 3
C. 6
D. 9
E. 15
Answer: E
IT技術の急速な発展につれて、IT認証試験の問題は常に変更されています。したがって、Ktestの100-105試験過去問も絶えずに更新されています。それに、Ktestの教材を購入すれば、Ktestは一年間の無料アップデート,サービスを提供してあげます。問題が更新される限り、Ktestは直ちに最新版のCisco Interconnecting Cisco Networking Devices Part 1 (ICND1 v3.0)試験過去問を送ってあげます。そうすると、あなたがいつでも最新バージョンの資料を持っていることが保証されます。Ktestはあなたが試験に合格するのを助けることができるだけでなく、あなたは最新の知識を学ぶのを助けることもできます。
1z0-899難易度,1z0-899ITパスポート,1z0-899試験,1z0-899問題集 [Oracle]
Ktest Oracle Certified Expert管理者資格1z0-899試験の過去問は、情報システムで必要となるOracle Certified Expert資格についての体系だった知識と経験を保持していることを証明します。Ktest 1z0-899試験を取得するには、Oracle Certified Expert資格の要件をしっかりと理解する必要があります。OracleOracle Certified Expert資格を取得するのがあなたのIT技術と能力を証明できるだけでなく、社会的地位を高める一つの方法です。KtestJava EE 6 Web Component Developer Certified Expert Exam試験では、Oracle Certified Expert認定を構成するために必要なスキルを検証します。1z0-899試験はIT環境を管理し、安全確保を行うための手段を提供することで、お客様がITサービスを柔軟に行えるよう支援しています。Ktestは一番人気があるサイトの一つで、Oracle Certified Expert認定の分野にとても有名です。
Ktestの Oracle Oracle Certified Expert資格 1z0-899試験参考書はIT上位な専門家がKtest 1z0-899試験参考書について自分の専門的な知識と経験を利用して研究したものでございます。勉強者のために試験問題は試験を完全に含んで問題集をお勧めします。Ktestが開発した問題集は実際的な問題と同じで、Ktestの1z0-899試験参考書を参考して、受験の自信を向上させることが出来ます。Ktestは勉強者に認定問題の提供に努力して、初心者としても認定に合格できます。問題と答えを暗記しただけで、素人としても合格できます。Ktestは1z0-899試験参考書の合格率を高めるのウエブサイトで、Ktest中のIT業界の専門家が研究を通じてKtest 1z0-899試験参考書について問題集を研究し続けています。KtestのJava EE 6 Web Component Developer Certified Expert Exam試験問題集を選られば、絶対に成功することができます。
Ktestは君の試験に100%の合格率を保証いたします。迷ってないください。親愛なる受験生の皆様、何かOracleの1z0-899試験参考書授業に加入したいのですか。実は措置を取ったら一回で試験に合格することができます。KtestのOracleの1z0-899試験参考書資料はとても良い選択なんですよ。Ktestの仮想ネットワークトレーニングと授業は大量の問題集に含まれていますから、ぜひあなたが気楽に試験に合格することを約束します。
Ktestの1z0-899資格を取得すれば、Ktestへようこそ、Ktestはその1z0-899資格認定の全部模擬問題集を提供しております。1z0-899試験参考書はKtest会社提供する場合は、すべての本格的なテストを提供し、これは完璧な組み合わせの審査され、それはあなたの時間を節約することができます。Ktestは全面的な練習試験を提供し、試す認定試験に自信を持って勉強者の能力を高めま す。代表的なもので、最新の1z0-899を提供し、予備知識、機会の開発、販売戦略、ソリュ ーションの設計関する知識が含まれて、絶対IT業皆様の最優秀選択です。IT技術者に向きの試験問題集です。95％以上の的中率を確認しながら学習を進めることができるため、学習理解度の確認に最適です。もし1z0-899試験参考書を受験したいなら、1z0-899試験参考書が必要でしょう。ターゲットがなくてあちこち参考資料を探すのをやめてください。どんな資料を利用すべきなのかがわからないとしたら、Ktestの1z0-899試験参考書を利用してみましょう。この問題集は的中率が高くて、あなたの一発成功を保証できますから。ほかの試験参考書より、この問題集はもっと正確に実際問題の範囲を絞ることができます。こうすれば、この問題集を利用して、あなたは勉強の効率を向上させ、十分にJava EE 6 Web Component Developer Certified Expert Exam試験参考書に準備することができます。
OracleOracle Certified Expert資格を認定することは、日頃の仕事の経験だけでは得られない知識を補うことができ、取得者はすでに、これからの時代に最も必要とされるIT資格のひとつとして今ますます取得価値が高まっています。このOracle Certified Expert資格を取得するには、試験に合格する必要であります。Oracle Certified Expert資格1z0-899参考書の試験内容を自身の経験に照らし合わせて学習できるため、理解するにも記憶するにも効率的に行えます。KtestのJava EE 6 Web Component Developer Certified Expert Exam練習問題集をダウンロードしてから、問題と解答を暗記したら、円滑に試験に合格することができます。私の夢はIT資格認証証書を取得することができるんです。このOracle1z0-899練習問題に合格するのは難しい、でも、大丈夫ですよね。Ktestソフトの試験教育資料を選びるのです。
1 .Given the element from the web application deployment descriptor:
<jsp property group>
<url pattern>/main/page1.jsp</url pattern>
<scripting invalid>true</scripting invalid>
</jsp property group>
And given that /main/page1.jsp contains:
<% int i = 12; %>
<b> <%= i %> </b>
What is the result?
A. <b> <b>
B. <b> l2 </b>
C. The JSP fails to execute. D. <% int i = 12 %>
<b> <%= i % > < b>
Answer: C
2 .A web application allows the HTML title banner to be set using a context initialization parameter called
titlestr. Which two properly set the title in the scenario? (Choose two)
A. <title> $ {titlestr} </title>
B. <title> $ {initparam.titlestr}</title>
C. <title> $ {param [0].titlestr} </title>
D. <title> $ {paramValues.titleStr} </title>
E. <title> $ {initParam [![[レジスタードトレードマーク]](https://blog.ss-blog.jp/_images_e/219.gif)
titl eSt ] } </title>
F. <title> $ {servletParams.titleStr} </title>
G.<title> $ {request.get ( titleStr ) } </title>
Answer: B,E
3 .Given:
11. <%
12. request.setAttribute ( vals , new String[] { 1 , 2 , 3 , 4 });
13. request.setAttribute ( index , 2 );
14. %>
15. <% - - insert code here - - %>
Which three EL expressions, inserted at line 15, are valid and evaluate to 3 ? (Choose three)
A. ${vals.2}
B. ${vals [ 2 ] }
C. ${vals.index}
D. ${vals[index] }
E. ${vals} [index]
F. ${vals.(vals.index) }
G.${vals [vals[index-1]] }
Answer: B,D,G
4 .You are building a dating service web site. Part of the form to submit a client's profile is a group of radio buttons for the person's hobbies:
<input type =r adi name = hobby Enu value = HI KI N > Hiking <br>
<input type =r adi name = hobby Enu value = SKI N > Sking <br>
<input type =r adi name = hobby Enu value = SCUB> SCUBA <br>
<! - - and more options - - >>
After the user submits this form, a confirmation screen is displayed with these hobbies listed. Assume that
an application-scoped hobbies, holds a map between the hobby enumerated type and the display name. Which EL code snippet will display Nth element of the user's selected hobbles?
A. ${hobbies [hobbyEnum[N]}
B. ${hobbies [paramValues.hobbyEnum[N]]}
C. ${hobbies [paramValues @hobby num @N]
D. ${hobbies.get(paramValues.hobbyEnum[N]) }
E. ${hobbies [paramValues.hobbyEnum.get(N)] }
Answer: B
5.Given:
1. <% int[] nums = {42,420,4200};
2. request.setAttribute("foo", nums); %>
3. ${5 + 3 It 6}
4. S(requestScope['foo'][0] ne 10 div0>
5. ${10 div 0}
What is the result?
A. true true
B. false true
C. false true 0
D. true true Infinity
E. false true Infinity
F. An exception is thrown
G. Compilation or translation fails
Answer: E
6.You are building a web application with a scheduling component. On the JSP, you need to show the
current date, the date of the previous week, and the date of the next week.
To help you present this information, you have created the following EL functions in thenamespace:
Name : curData; signature: java.util.utilDate CurrentDate()
Name : curData; signature: java.util.utilDate addweek (java.util.Date, int)
Name: dateString; signature: java.util.String getDataString (jave.util.Data)
Which EL code snippet will generate the string for the previous week?
A. ${d:dateString(affWeek(curDate(), -1)) }
B. ${d:dateString [addWeek[curDate[], - ]] }
C. ${d:dateString [d:addWeek[d:curDate[], - 1]] }
D. ${d:dateString (d:addWeek(d:curDate(), -1)) }
Answer: D
7.Given a header in an HI IP request:
X-Retries: 4
A Which two retrieve the value of the header from a given HttpServletRequest request? (Choose two)
A. request-getHeader("X-Retries")
B. request.getlntHeader("X-Retries")
C. request.getRequestHeader("X-Retries")
D. request.getHeaders{"X-Retries").get(0)
E. request.getRequestHeaders("X-Retries").get(0)
Answer: A,B
8.Given an HttpServletRequestrequest and HttpResponseresponse, which sets a cookie username with
the value joe in a servlet?
A. request.addCookie("username", "joe")
B. request.setCookie("username", "joe")
C. response.addCookie("username", "joe")
D. request.addHeader(new Cookie("username", "joe"))
E. request.addCookie(new Cookie("username", "joe"))
F. response.addCookie(new Cookie("username", "joe"))
G. response.addHeader(new Cookie("username", "joe"))
Answer: F
9.Which annotation enables a servlet to efficiently process requests of typo multipart/form-data that
involve large files being uploaded by the client?
A. @AcceptMultipart
B. @MultiPartConfig
C. @MultiPartFormData
D. @WebServlet (multipart = true)
Answer: B
Ktestの Oracle Oracle Certified Expert資格 1z0-899試験参考書はIT上位な専門家がKtest 1z0-899試験参考書について自分の専門的な知識と経験を利用して研究したものでございます。勉強者のために試験問題は試験を完全に含んで問題集をお勧めします。Ktestが開発した問題集は実際的な問題と同じで、Ktestの1z0-899試験参考書を参考して、受験の自信を向上させることが出来ます。Ktestは勉強者に認定問題の提供に努力して、初心者としても認定に合格できます。問題と答えを暗記しただけで、素人としても合格できます。Ktestは1z0-899試験参考書の合格率を高めるのウエブサイトで、Ktest中のIT業界の専門家が研究を通じてKtest 1z0-899試験参考書について問題集を研究し続けています。KtestのJava EE 6 Web Component Developer Certified Expert Exam試験問題集を選られば、絶対に成功することができます。
Ktestは君の試験に100%の合格率を保証いたします。迷ってないください。親愛なる受験生の皆様、何かOracleの1z0-899試験参考書授業に加入したいのですか。実は措置を取ったら一回で試験に合格することができます。KtestのOracleの1z0-899試験参考書資料はとても良い選択なんですよ。Ktestの仮想ネットワークトレーニングと授業は大量の問題集に含まれていますから、ぜひあなたが気楽に試験に合格することを約束します。
Ktestの1z0-899資格を取得すれば、Ktestへようこそ、Ktestはその1z0-899資格認定の全部模擬問題集を提供しております。1z0-899試験参考書はKtest会社提供する場合は、すべての本格的なテストを提供し、これは完璧な組み合わせの審査され、それはあなたの時間を節約することができます。Ktestは全面的な練習試験を提供し、試す認定試験に自信を持って勉強者の能力を高めま す。代表的なもので、最新の1z0-899を提供し、予備知識、機会の開発、販売戦略、ソリュ ーションの設計関する知識が含まれて、絶対IT業皆様の最優秀選択です。IT技術者に向きの試験問題集です。95％以上の的中率を確認しながら学習を進めることができるため、学習理解度の確認に最適です。もし1z0-899試験参考書を受験したいなら、1z0-899試験参考書が必要でしょう。ターゲットがなくてあちこち参考資料を探すのをやめてください。どんな資料を利用すべきなのかがわからないとしたら、Ktestの1z0-899試験参考書を利用してみましょう。この問題集は的中率が高くて、あなたの一発成功を保証できますから。ほかの試験参考書より、この問題集はもっと正確に実際問題の範囲を絞ることができます。こうすれば、この問題集を利用して、あなたは勉強の効率を向上させ、十分にJava EE 6 Web Component Developer Certified Expert Exam試験参考書に準備することができます。
OracleOracle Certified Expert資格を認定することは、日頃の仕事の経験だけでは得られない知識を補うことができ、取得者はすでに、これからの時代に最も必要とされるIT資格のひとつとして今ますます取得価値が高まっています。このOracle Certified Expert資格を取得するには、試験に合格する必要であります。Oracle Certified Expert資格1z0-899参考書の試験内容を自身の経験に照らし合わせて学習できるため、理解するにも記憶するにも効率的に行えます。KtestのJava EE 6 Web Component Developer Certified Expert Exam練習問題集をダウンロードしてから、問題と解答を暗記したら、円滑に試験に合格することができます。私の夢はIT資格認証証書を取得することができるんです。このOracle1z0-899練習問題に合格するのは難しい、でも、大丈夫ですよね。Ktestソフトの試験教育資料を選びるのです。1 .Given the element from the web application deployment descriptor:
<jsp property group>
<url pattern>/main/page1.jsp</url pattern>
<scripting invalid>true</scripting invalid>
</jsp property group>
And given that /main/page1.jsp contains:
<% int i = 12; %>
<b> <%= i %> </b>
What is the result?
A. <b> <b>
B. <b> l2 </b>
C. The JSP fails to execute. D. <% int i = 12 %>
<b> <%= i % > < b>
Answer: C
2 .A web application allows the HTML title banner to be set using a context initialization parameter called
titlestr. Which two properly set the title in the scenario? (Choose two)
A. <title> $ {titlestr} </title>
B. <title> $ {initparam.titlestr}</title>
C. <title> $ {param [0].titlestr} </title>
D. <title> $ {paramValues.titleStr} </title>
E. <title> $ {initParam [
titl eSt ] } </title>F. <title> $ {servletParams.titleStr} </title>
G.<title> $ {request.get ( titleStr ) } </title>
Answer: B,E
3 .Given:
11. <%
12. request.setAttribute ( vals , new String[] { 1 , 2 , 3 , 4 });
13. request.setAttribute ( index , 2 );
14. %>
15. <% - - insert code here - - %>
Which three EL expressions, inserted at line 15, are valid and evaluate to 3 ? (Choose three)
A. ${vals.2}
B. ${vals [ 2 ] }
C. ${vals.index}
D. ${vals[index] }
E. ${vals} [index]
F. ${vals.(vals.index) }
G.${vals [vals[index-1]] }
Answer: B,D,G
4 .You are building a dating service web site. Part of the form to submit a client's profile is a group of radio buttons for the person's hobbies:
<input type =
r adi name = hobby Enu value = HI KI N > Hiking <br><input type =
r adi name = hobby Enu value = SKI N > Sking <br><input type =
r adi name = hobby Enu value = SCUB> SCUBA <br><! - - and more options - - >>
After the user submits this form, a confirmation screen is displayed with these hobbies listed. Assume that
an application-scoped hobbies, holds a map between the hobby enumerated type and the display name. Which EL code snippet will display Nth element of the user's selected hobbles?
A. ${hobbies [hobbyEnum[N]}
B. ${hobbies [paramValues.hobbyEnum[N]]}
C. ${hobbies [paramValues @
hobby num @N]D. ${hobbies.get(paramValues.hobbyEnum[N]) }
E. ${hobbies [paramValues.hobbyEnum.get(N)] }
Answer: B
5.Given:
1. <% int[] nums = {42,420,4200};
2. request.setAttribute("foo", nums); %>
3. ${5 + 3 It 6}
4. S(requestScope['foo'][0] ne 10 div0>
5. ${10 div 0}
What is the result?
A. true true
B. false true
C. false true 0
D. true true Infinity
E. false true Infinity
F. An exception is thrown
G. Compilation or translation fails
Answer: E
6.You are building a web application with a scheduling component. On the JSP, you need to show the
current date, the date of the previous week, and the date of the next week.
To help you present this information, you have created the following EL functions in the
namespace:Name : curData; signature: java.util.utilDate CurrentDate()
Name : curData; signature: java.util.utilDate addweek (java.util.Date, int)
Name: dateString; signature: java.util.String getDataString (jave.util.Data)
Which EL code snippet will generate the string for the previous week?
A. ${d:dateString(affWeek(curDate(), -1)) }
B. ${d:dateString [addWeek[curDate[], - ]] }
C. ${d:dateString [d:addWeek[d:curDate[], - 1]] }
D. ${d:dateString (d:addWeek(d:curDate(), -1)) }
Answer: D
7.Given a header in an HI IP request:
X-Retries: 4
A Which two retrieve the value of the header from a given HttpServletRequest request? (Choose two)
A. request-getHeader("X-Retries")
B. request.getlntHeader("X-Retries")
C. request.getRequestHeader("X-Retries")
D. request.getHeaders{"X-Retries").get(0)
E. request.getRequestHeaders("X-Retries").get(0)
Answer: A,B
8.Given an HttpServletRequestrequest and HttpResponseresponse, which sets a cookie username with
the value joe in a servlet?
A. request.addCookie("username", "joe")
B. request.setCookie("username", "joe")
C. response.addCookie("username", "joe")
D. request.addHeader(new Cookie("username", "joe"))
E. request.addCookie(new Cookie("username", "joe"))
F. response.addCookie(new Cookie("username", "joe"))
G. response.addHeader(new Cookie("username", "joe"))
Answer: F
9.Which annotation enables a servlet to efficiently process requests of typo multipart/form-data that
involve large files being uploaded by the client?
A. @AcceptMultipart
B. @MultiPartConfig
C. @MultiPartFormData
D. @WebServlet (multipart = true)
Answer: B
Microsoft Azure Developer Specialist認定資格 70-532 試験，70-533試験，,70-534試験 [Microsoft]
KtestのMicrosoftのMicrosoft Azure Developer Specialist認定資格70-532（Developing Microsoft Azure Solutions）試験は、専門家、豊富な経験と洞察力テストパターン変化によるアマゾンの蓄積です。どんなにあなたが伝統的な方法によって学ばない、とあなたは試験、あなたが最初に試すアマゾンの認証を渡すことができるかわからない方法。
Microsoftは、主に情報技術の巨人アマゾン認定の専門家を紹介しています。これらアマゾンの審査を経てハードワークと多くの時間を必要とします。任意の圧力の種類が非常に容易であることなく、あなたはMicrosoftが働いていたことを証明することができ、ありがとうございます。質問は今、あなたは簡単にその困難なテストを証明するために役立つ方法です。実際にアマゾンの廃棄物は、実際のテストと特別な質問と回答を提供します。
Ktestの70-532試験参考書を利用してみたらどうですか。70-532試験参考書本語試験に関連するすべての参考書の中で一番優秀なものだと言えます。
Share some Microsoft Azure Developer Specialist 70-532 exam questions and answers below.
You need to meet the performance and scalability requirements. Which SQL Database configuration should you use?
A. Use the S1 performance level for On-Peak mode.
B. Use the P2 performance level for On-Peak mode.
C. Use the S2 performance level for On-Peak mode.
D. Use the P1 performance level for On-Peak mode.
Answer: D
Users report that after periods of inactivity the website is slow to render pages and to process sign-in attempts. You need to ensure that the website is always responsive. What should you do?
A. Add the following markup at line WC14:
B. Add the following markup at line WC08:C. Add the following markup at line WC14:D. In the Azure management portal, enable Always On support for the website.E. In the Azure management portal, disable Always On support for the website.Answer: AYou need to choose an Azure storage service solution. Which solution should you choose?A. Queue storageB. Blob storageC. File storageD. Table storageAnswer: CYou need to debug the website remotely. Which three actions should you take? Each correct answer presents part of the solution.A. In the Azure management portal, configure a monitoring endpoint.B. In the Azure management portal, set remote debugging to On and set the Visual Studio version to 2013.C. Install the Azure SDK for .NET on the computer that runs Visual Studio.D. In the web.config file for the website, set the debug attribute of the compilation element to true.E. In the Azure management portal, set the web hosting plan to Standard.Answer: B, C, DYou need to implement data storage for patient information. What should you do?A. Use the Update Entity operation of the Table Service REST API.B. Use the Put Blob operation of the Blob Service REST API.C. Use the Put Message operation of the Create Queue REST API.D. Use the Set Share Metadata operation of the File Service REST API.Answer: AYou need to configure role instances. Which size should you specify for the VM?A. Use Small for Off-Peak mode.B. Use Large for On-Peak mode.C. Use Extra Large for On-Peak mode.D. Use Extra Small for Off-Peak mode.Answer: BYou need to move the VM. What should you do?A. Use the Blob Service REST APIB. Use the Service Management REST APIC. Run the Azure PowerShell Convert-VHD cmdlet.D. Run the Azure PowerShell New-AzureVMcmdletAnswer: AYou need to configure the virtual network.What are two possible ways to achieve this goal? Each correct answer presents a complete solution.A. Configure a point-to-site virtual network.B. Configure a site-to-site virtual network.C. Configure a multi-site virtual network.D. Configure a cloud-only virtual network.Answer: A, B
KtestはIT認定試験に関連する資料の専門の提供者として、受験生の皆さんに最も優秀な試験Developing Microsoft Azure Solutions試験問題集を提供することを目標としています。他のサイトと比較して、Ktestは皆さんにもっと信頼されています。なぜでしょうか。それはKtestは長年の経験を持っていて、ずっとIT認定試験の研究に取り組んでいて、試験についての多くの規則を総括しましたから。そうすると、Ktestの70-532試験参考書は高い的中率を持つことができます。これはまた試験の合格率を保証します。従って、Ktestは皆の信頼を得ました。
関連試験：
70-533試験：Implementing Microsoft Azure Infrastructure Solutions
70-534試験：Architecting Microsoft Azure Solutions
Microsoftは、主に情報技術の巨人アマゾン認定の専門家を紹介しています。これらアマゾンの審査を経てハードワークと多くの時間を必要とします。任意の圧力の種類が非常に容易であることなく、あなたはMicrosoftが働いていたことを証明することができ、ありがとうございます。質問は今、あなたは簡単にその困難なテストを証明するために役立つ方法です。実際にアマゾンの廃棄物は、実際のテストと特別な質問と回答を提供します。
Ktestの70-532試験参考書を利用してみたらどうですか。70-532試験参考書本語試験に関連するすべての参考書の中で一番優秀なものだと言えます。
Share some Microsoft Azure Developer Specialist 70-532 exam questions and answers below.
You need to meet the performance and scalability requirements. Which SQL Database configuration should you use?
A. Use the S1 performance level for On-Peak mode.
B. Use the P2 performance level for On-Peak mode.
C. Use the S2 performance level for On-Peak mode.
D. Use the P1 performance level for On-Peak mode.
Answer: D
Users report that after periods of inactivity the website is slow to render pages and to process sign-in attempts. You need to ensure that the website is always responsive. What should you do?
A. Add the following markup at line WC14:
KtestはIT認定試験に関連する資料の専門の提供者として、受験生の皆さんに最も優秀な試験Developing Microsoft Azure Solutions試験問題集を提供することを目標としています。他のサイトと比較して、Ktestは皆さんにもっと信頼されています。なぜでしょうか。それはKtestは長年の経験を持っていて、ずっとIT認定試験の研究に取り組んでいて、試験についての多くの規則を総括しましたから。そうすると、Ktestの70-532試験参考書は高い的中率を持つことができます。これはまた試験の合格率を保証します。従って、Ktestは皆の信頼を得ました。関連試験：
70-533試験：Implementing Microsoft Azure Infrastructure Solutions
70-534試験：Architecting Microsoft Azure Solutions
Cisco 300-165 practice test [Cisco]
Ktestは、あなたの試験に合格する300-165の事実を学ぶために賢いと最速の方法です。最新のCiscoのCCNP Data Center認定資格300-165情報は、1つの単純な低価格のためのKtestからのすべての利用可能です - それは300-165のダンプとして取得するように簡単です。
IT夢を持っていたら、速くKtestに来ましょう。 Ktestにはすごいトレーニング即ち Ciscoの300-165試験参考書試験トレーニング資料があります。これはIT職員の皆が熱望しているものです。あなたが試験に合格することを助けられますから。Ktestの300-165試験参考書問題集を入手してから、非常に短い時間で試験に準備しても、あなたは順調に試験に合格することができます。
Ciscoの300-165認定試験を受けて300-165認証資格を取得したいですか。Ktestはあなたの成功を保証することができます。もちろん、試験の準備をするときに試験に関連する知識を学ぶのは必要です。なお、大切なのは、自分に相応しい効率的なツールを選択することです。
Ktestの300-165問題集はあなたに合う最善の勉強法です。この高品質の問題集は信じられないほどの結果を見せることができます。自分が試験に合格できない心配があれば、はやくKtestのウェブサイトをクリックしてもっと多くの情報を読んでください。KtestのCiscoの300-165認定試験の合格率は100％になっています。不合格になる場合或いはCiscoの300-165問題集がどんな問題があれば、私たちは全額返金することを保証いたします。
Share some CCNP Data Center 300-165 exam questions and answers below.
Which statement about implementation of Cisco TrustSec on Cisco Nexus 5546 or 5548 switches are true?
A. Cisco TrustSec support varies depending on Cisco Nexus 5500 Series Switch model.
B. The hardware is not able to support MACsec switch-port-level encryption based on IEEE 802.1AE.
C. The maximum number of RBACL TCAM user configurable entries is 128k.
D. The SGT Exchange Protocol must use the management (mgmt 0) interface.
Answer: B
In the dynamic vNIC creation wizard, why are choices for Protection important?
A. They allow reserve vNICs to be allocated out of the spares pool.
B. They enable hardware-based failover.
C. They select the primary fabric association for dynamic vNICs.
D. They allow dynamic vNICs to be reserved for fabric failover.
Answer: C
By default it will take 10 seconds for authentication to fail due to an unresponsive RADIUS server before a Cisco Nexus series switch reverts to another RADIUS server or local authentication. What is one efficient way to improve the reaction time to a RADIUS server failure?
A. Decrease the global RADIUS retransmission count to 1.
B. Decrease the global RADIUS timeout interval to 5 seconds.
C. Configure the RADIUS retransmission count and timeout interval per server, versus globally.
D. Configure per server a test idle timer, along with a username and password.
Answer: D
Which statement about RADIUS configuration distribution using Cisco Fabric Services on a Cisco Nexus 7000 Series Switch is true?
A. Cisco Fabric Services does not distribute the RADIUS server group configuration or server and global keys.
B. Enabling Cisco Fabric Services causes the existing RADIUS configuration on your Cisco NX-OS device to be immediately distributed.
C. When the RADIUS configuration is being simultaneously changed on more than one device in a Cisco Fabric Services region, the most recent changes will take precedence.
D. Only the Cisco NX-OS device with the lowest IP address in the Cisco Fabric Services region can lock the RADIUS configuration.
Answer: A
Which GLBP load-balancing algorithm ensures that a client is always mapped to the same VMAC address?
A. vmac-weighted
B. dedicated-vmac-mode
C. shortest-path and weighting
D. host-dependent
Answer: D
KtestのCiscoの300-165試験問題集はIT認証試験を受ける人々の必需品です。このトレーニング資料を持っていたら、試験のために充分の準備をすることができます。そうしたら、Implementing Cisco Data Center Infrastructure試験に受かる信心も持つようになります。KtestのCiscoの300-165試験問題集グ資料は特別に受験生を対象として研究されたものです。インターネットでこんな高品質の試験問題集を提供できるサイトはKtestだけです。CCNP Data Center認定資格300-165試験製品によって複雑さや難易度は異なります。Ktest高い品質の300-165試験の参考書を提供し、高い分数で300-165試験を通過できるを保障します。
IT夢を持っていたら、速くKtestに来ましょう。 Ktestにはすごいトレーニング即ち Ciscoの300-165試験参考書試験トレーニング資料があります。これはIT職員の皆が熱望しているものです。あなたが試験に合格することを助けられますから。Ktestの300-165試験参考書問題集を入手してから、非常に短い時間で試験に準備しても、あなたは順調に試験に合格することができます。
Ciscoの300-165認定試験を受けて300-165認証資格を取得したいですか。Ktestはあなたの成功を保証することができます。もちろん、試験の準備をするときに試験に関連する知識を学ぶのは必要です。なお、大切なのは、自分に相応しい効率的なツールを選択することです。
Ktestの300-165問題集はあなたに合う最善の勉強法です。この高品質の問題集は信じられないほどの結果を見せることができます。自分が試験に合格できない心配があれば、はやくKtestのウェブサイトをクリックしてもっと多くの情報を読んでください。KtestのCiscoの300-165認定試験の合格率は100％になっています。不合格になる場合或いはCiscoの300-165問題集がどんな問題があれば、私たちは全額返金することを保証いたします。
Share some CCNP Data Center 300-165 exam questions and answers below.
Which statement about implementation of Cisco TrustSec on Cisco Nexus 5546 or 5548 switches are true?
A. Cisco TrustSec support varies depending on Cisco Nexus 5500 Series Switch model.
B. The hardware is not able to support MACsec switch-port-level encryption based on IEEE 802.1AE.
C. The maximum number of RBACL TCAM user configurable entries is 128k.
D. The SGT Exchange Protocol must use the management (mgmt 0) interface.
Answer: B
In the dynamic vNIC creation wizard, why are choices for Protection important?
A. They allow reserve vNICs to be allocated out of the spares pool.
B. They enable hardware-based failover.
C. They select the primary fabric association for dynamic vNICs.
D. They allow dynamic vNICs to be reserved for fabric failover.
Answer: C
By default it will take 10 seconds for authentication to fail due to an unresponsive RADIUS server before a Cisco Nexus series switch reverts to another RADIUS server or local authentication. What is one efficient way to improve the reaction time to a RADIUS server failure?
A. Decrease the global RADIUS retransmission count to 1.
B. Decrease the global RADIUS timeout interval to 5 seconds.
C. Configure the RADIUS retransmission count and timeout interval per server, versus globally.
D. Configure per server a test idle timer, along with a username and password.
Answer: D
Which statement about RADIUS configuration distribution using Cisco Fabric Services on a Cisco Nexus 7000 Series Switch is true?
A. Cisco Fabric Services does not distribute the RADIUS server group configuration or server and global keys.
B. Enabling Cisco Fabric Services causes the existing RADIUS configuration on your Cisco NX-OS device to be immediately distributed.
C. When the RADIUS configuration is being simultaneously changed on more than one device in a Cisco Fabric Services region, the most recent changes will take precedence.
D. Only the Cisco NX-OS device with the lowest IP address in the Cisco Fabric Services region can lock the RADIUS configuration.
Answer: A
Which GLBP load-balancing algorithm ensures that a client is always mapped to the same VMAC address?
A. vmac-weighted
B. dedicated-vmac-mode
C. shortest-path and weighting
D. host-dependent
Answer: D
KtestのCiscoの300-165試験問題集はIT認証試験を受ける人々の必需品です。このトレーニング資料を持っていたら、試験のために充分の準備をすることができます。そうしたら、Implementing Cisco Data Center Infrastructure試験に受かる信心も持つようになります。KtestのCiscoの300-165試験問題集グ資料は特別に受験生を対象として研究されたものです。インターネットでこんな高品質の試験問題集を提供できるサイトはKtestだけです。CCNP Data Center認定資格300-165試験製品によって複雑さや難易度は異なります。Ktest高い品質の300-165試験の参考書を提供し、高い分数で300-165試験を通過できるを保障します。
